 Rated capacity 1000 lbs./four persons |
| Totally enclosed platform with 42" guardrails, midrails, 4" toeboards and swing-in gate |
| Large 3' x 8' platform with serrated grating deck to assure secure footing |
| Built-in ladder provides access to platform in fully lowered position |
| Boxed scissor members and oversize cross-axles reduce platform sway |
| Sturdy rectangular base frame with non-marking 8" swivel casters for easy rolling and maneuverability |
| Casters have combined wheel and swivel locks |
| Self-storing outriggers extend from base to provide maximum stability [optional on lower height models |
| Leveling jacks secure unit to floor and compensate for uneven surfaces |
| Bubble levels indicate proper leveling, essential for safe operation |
| Safety Orange finish for high visibility |
| Meets/exceeds ANSI A92.3-1990 code requirements |
| Platform controls: for operator safety both hands are required to change elevation |
| Lockable emergency stops: located on platform for operator use; also on base for use by ground personnel |
| CAUTION: Unless special provisions are made, platforms and lifts must not be used for energized bare-wire electrical work or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from the immediate work area |
Standard Power:
- 120 volt AC with thermal overload protection including dual contactors for additional safety
- Low voltage platform controlled circuit for additional worker protection
|
Hydraulic System:
- Large diameter cylinders with chrome-plated rams and fluid restrictors
- Low pressure system includes by-pass pressure valve to prevent overload
- Check valve maintains platform elevation
- Solenoid valve provides remote lowering
- Base mounted lowering valve for safe descent in power failure
|
