|
|
|
|
|
|
System One Heavy Duty Contractors Rig
|
Our Price: $709.00
|
|
|
System One's Contractor Rig for pick-ups is the undisputed leader among contractor ladder racks. Its heavy wall, rust-free aluminum extrusions provide outstanding performance in high abuse environments. Its ability to be configured to your own particular needs means better versatility, better organization, and, ultimately, better efficiency for you and your company.
|
|
|
|
|
|
|
|
|
|
System One Work Winches (Set of 4)
|
|
Our Price: $189.00
|
|
|
The Work Winch is the most universal and easiest to use tie-down system ever made. Work Winches "plug in" to any System One I.T.S. series rack in 2 to 3 minutes. They are constructed of aluminum alloy and stainless steel with a PVC bearing. It is the only rust free tie-down system made and has a nearly unlimited lifespan. This is not a bolted-on aftermarket accessory, but an integral part of a System One I.T.S. series ladder rack.
|
|
|
|
|
|
|
|
|
|
System One Heavy Duty Utility Rig for Pickups
|
|
Our Price: $419.00
|
|
|
System One's Utility Rig for pick-up trucks is a highly versatile and economical ladder rack. Its extremely rigid free-standing trusses have a 600 lb. working load capacity and allow easy loading and unloading of equipment and material.
|
|
|
|
|
|
|
|
|
|
System One Contractors Rig Van Rack
|
|
Our Price: $559.00
|
|
|
System One's® Contractor Rig® for vans is the most versatile contractor rack available anywhere. It is made entirely of aluminum alloy and has five crossmembers to support loads of any length. High density polyethylene Ladder Glide® inserts in the crossmembers allow ladders and other cargo to slide on and off effortlessly.
|
|
|
|
|
|
|
|
|
|
System One Utility Rig Van Rack
|
|
Our Price: $225.00
|
|
|
Utility Rigs® for vans come in 2 and 3 truss versions and are both economical and functional. Additionally, because they are aluminum, you won't get rust lines staining the sides of your van below the brackets. All of our van racks are of the I.T.S.™ series, so Work Winches® can be installed at any time. Also, Ladder Glide® Inserts are provided to protect the cargo from abrasion and to make loading and unloading easy.
|
|
|
|
|
|
|
|
|
|
Sliding Cargo Anchor with Insert Knob
|
|
Our Price: $7.90
|
|
|
The Sliding Cargo Anchor is an extremely versatile anchor point which can be positioned anywhere in any T-slot on the rack. They are cast from 413F aluminum alloy and are 4" long overall with a smooth 1" hole for hooks and ropes. They are typically used in the Pick-Up Trak on the bed rail to anchor items which would otherwise roll or slide.
|
|
|
|
|
|
|
|
|
|
Inside Aluminum Hook/Anchor
|
|
Our Price: $9.50
|
|
|
This hook and anchor is handy for small coils of rope or cord. The anchor portion is perfect for holding the hook end of a Work Winch strap or ratchet tie-down strap when rack is empty. They are 4 1/2" tall, made from 1/4" x 1" aluminum, vinyl coated and are supplied with stainless steel fasteners.
|
|
|
|
|
|
|
|
|
|
Aluminum 13" Tall Side Stop
|
|
Our Price: $12.50
|
|
|
The Tall Side Stop is a heavy duty stop made from 1/4" x 2" aluminum and vinyl coated. It is designed for those occasions when ladders or lumber exceed the height of the extension beam. It is 13" tall, and mounts anywhere on the horizontal flange of the Extension Beam. Drilling is required but a small V-groove is provided on the underside of the Extension Beam to aid in the positioning of a drill bit. Stainless steel fasteners are included.
|
|
|
|
|
|
|
|
|
|
Aluminum 5" Crossmember J Hook
|
|
Our Price: $16.75
|
|
|
This is a very useful hook because it takes advantage of a space that is not often utilized. These hooks are ideal for large coils of extension cord, welding cable or items that can't coil into a tight radius like high pressure hose. It is made from 1/4" x 2" aluminum and vinyl coated. They are 10" tall overall and the hook portion has a depth of 5" and a throat of 3 1/4".
|
|
|
|
|
|
|
|
|
|
Aluminum 5" Extension Beam J Hook
|
|
Our Price: $16.00
|
|
|
This hook is similar to the Crossmember J Hook except that it mounts to the Extension Beam instead of the crossmember. The Extension Beam J Hook is ideal for large coils of extension cord, welding cable or items that can't coil into a tight radius like high pressure hose. It is 4" tall, has a hook depth of 3 1/2" and a throat of 3 1/4".
|
|
|
|
