Home Sealing Foam Kit 300
Touch ‘n Seal Home Sealing Foam Kits are uniquely formulated open-cell class I fire-retardants for use in commercial and residential insulation projects. Thinly applied in the wall cavity or “picture-framed” around the studs, Home Sealing Foam Kits eliminate air infiltration, offering the best building envelope solution.
- Yields 300 board feet or 300 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 33.6 cubic feet
- Open-cell, non-structural air sealing and insulating foam
- Increases R-value and sound reduction
- Reduces energy loss
- No Ozone Depleting Chemicals or formaldehyde
- Dries in one minute
- Ideal for flash & batt applications (air sealing)
- Class 1 fire-retardant
Includes:
Foam cylinders, fan and conical spray nozzles, applicator gun, and 15' hose
Shelf Life
1 year in unopened container when stored between 60° - 90°F (16° – 32°C), in a dry, well ventilated area.
Specifications:
- Tack Free Time: 30 – 60 seconds
- Fully Cured: Approximately 1 hour
- Density (ASTM D-1622): 1.0 - 1.25 pcf
- K-Factor (ASTM C-518): 0.25 BTU/in/hr^-1/ft^-1/F^-1
- R-Value (ASTM C-518): 4 per inch
- Closed Cell Content (ASTM D-2856): < 10%
- Open Cell Content (ASTM D-6226): > 90%
- ASTM E-96 Water Vapor Transmission: 5.4 perms @ 1 in. (25 mm)
Click for Technical Data Sheet
Always consult local and state building codes prior to application to ensure compliance.
*Due to Hazardous Material shipping regulations, no returns are allowed on this item. All Sales Are Final*
*Due to Hazardous Material shipping regulations, no returns are allowed on this item. All Sales Are Final*
For proper usage guidelines for your Two Component Kit, Please Click Here
