 |
 |
 |
|
U2-200 Two Component Foam Kit
Portable, disposable and self-contained with color-coded, pre-connected hoses. Yields 200 board feet and provides a quick consistent flow of foam that dries in under a minute. Foam expands 30X. Touch N Seal Foam Kits are designed for use in commercial sealing, insulating, patching, and filling applications. Portable and disposable, these two-component foam systems provide a quick, consistent flow of polyurethane foam that dries in less than one minute.
- Yields 200 board feet or 200 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 16.6 cubic feet
- Portable, disposable, self-contained units
- High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications
- Foam expands 30 times, dries in less than 1 minute
- Fast set-up
- Upright assembly
- No CFCs or urea formaldehyde
- Kits include A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual instructions (English, Spanish, French)
- Clear, color-coded hoses
- Includes illustrated instructions
- 18 Month Shelf Life, Use All Contents Within 30 Days of Initial Dispensing
Specifications:
- Density (ASTM D-1622): 1.75 +/- 0.2 pcf
- K-Factor (ASTM C-518): 0.14 BTU/in/hr^-1/ft^-1/F^-1
- R-Value (ASTM C-518): 7.12 per inch
- Compressive Strength (ASTM D-1621): 10% parallel: 19 psi, 10% perpendicular: 13.4 psi
- Tensile Strength (ASTM D-1623): 30 psi
- Dimensional Stability (ASTM D-2126): -40°F, +.88% volume change; 158°F, 100% RH, 2 Weeks: +14% volume change
- Water Absorption (ASTM D-2842); 1.0 - 3.5% vol
- Closed Cell Content (ASTM D-2856): 90% minimum
- Maximum Service Temperature for Cured Foam: 240°F (116°C)
 Click for Technical Data Sheet
*Due to Hazardous Material shipping regulations, no returns are allowed on this item. All Sales Are Final*
For proper usage guidelines for your Two Component Kit, Please Click Here
|
|
|
 |
|
 |
|
