TPI Architectural Flat Panel Emitter Electric Overhead Infrared Heater
TPI Architectural Flat Panel Emitter Electric Overhead Infrared Heater
| Model Number | Voltage | Watts | BTU | Phase |
|---|---|---|---|---|
| FSA-1412-1 | 120 | 1,450 | 4,947 | 1 |
| FSA-1420-1 | 208 | 1,450 | 4,947 | 1 |
| FSA-1424-1 | 240 | 1,450 | 4,947 | 1 |
| FSA-1427-1 | 277 | 1,450 | 4,947 | 1 |
| FSA-1448-1 | 480 | 1,450 | 4,947 | 1 |
| FSA-1457-1 | 600 | 1,450 | 4,947 | 1 |
| FSA-3120-1 | 208 | 3,150 | 10,748 | 1 |
| FSA-3124-1 | 240 | 3,150 | 10,748 | 1 |
| FSA-3127-1 | 277 | 3,150 | 10,748 | 1 |
| FSA-3148-1 | 480 | 3,150 | 10,748 | 1 |
| FSA-3157-1 | 600 | 3,150 | 10,748 | 1 |
| FSA-4320-3 | 208 | 4,300 | 14,672 | 1 or 3 |
| FSA-4324-3 | 240 | 4,300 | 14,672 | 1 or 3 |
| FSA-4327-1 | 277 | 4,300 | 14,672 | 1 |
| FSA-4348-3 | 480 | 4,300 | 14,672 | 1 or 3 |
| FSA-4357-3 | 600 | 4,300 | 14,672 | 1 or 3 |
| FSA-9520-3 | 208 | 9,500 | 32,414 | 1 or 3 |
| FSA-9524-3 | 240 | 9,500 | 32,414 | 1 or 3 |
| FSA-9527-1 | 277 | 9,500 | 32,414 | 1 |
| FSA-9548-3 | 480 | 9,500 | 32,414 | 1 or 3 |
| FSA-9557-3 | 600 | 9,500 | 32,414 | 1 or 3 |
TPI Architectural Flat Panel Emitter Electric Overhead Infrared Heater
Architectural Overhead Infrared Heater Panels for Indoor Spot Heating, Zone, or Total Area Heating Applications
Features:
- ETL C/US Listed for suspended high-bay indoor or protected outdoor applications.
- Designed for spot / zone or total area heating applications.
- Heating elements included (Heavy Duty Single Flat Panel Emitter).
- Medium wave emitter operates at 78.5% radiant efficiency - with a 25,000 hour life expectancy.
- Extruded aluminum housing with a nickel-gray finish, providing a 60° symmetrical heat pattern.
- Electrical enclosure included for direct wire installation.
- Single or three-phase wiring configurations.
- "L" brackets included on the top of the heating housing for chain suspension, wall mounting, or ceiling mounting options.
- Flat panel wall heaters can be surface mounted, semi-recessed, or fully-recessed.
- Zinc plated heavy-gauge safety grills included for all models.
- Optional wall mounting bracket sold separately.
- Shipped fully assembled and made in U.S.A.
Housing & Construction:
Extruded 6063 aluminum housing with protective grill. Powder coat silver finish for excellent durability and attractive appearance in commercial applications. ETL C/US listed for indoor, dry environments. Made in USA.
Elements:
Heavy duty flat panel emitter. Available wattages in 1450, 3150, 4300 and 9500 Watts per element. Available in standard voltages from 120 to 600 Volts. *Note: Replacement elements located on FSS Series pages.
Controls:
Flat panel emitter heaters are not manufactured with any control device on the unit. All controls and accessories should be specified as remote mounted. Please consult the technical sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each flat panel wall heater.
WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov
| Weight(LBS) | 0.000000 |
|---|
