TPI Heavy Duty Flat Panel Emitter Electric Overhead Infrared Heater
TPI Heavy Duty Flat Panel Emitter Electric Overhead Infrared Heater
Model Number | BTU | Watts | Voltage | Phase |
---|---|---|---|---|
FSS-1412-1 | 4,947 | 1,450 | 120 | 1 |
FSS-1420-1 | 4,947 | 1,450 | 208 | 1 |
FSS-1424-1 | 4,947 | 1,450 | 240 | 1 |
FSS-1427-1 | 4,947 | 1,450 | 277 | 1 |
FSS-1448-1 | 4,947 | 1,450 | 480 | 1 |
FSS-1457-1 | 4,947 | 1,450 | 600 | 1 |
FSS-3120-1 | 10,748 | 3,150 | 208 | 1 |
FSS-3124-1 | 10,748 | 3,150 | 240 | 1 |
FSS-3127-1 | 10,748 | 3,150 | 277 | 1 |
FSS-3148-1 | 10,748 | 3,150 | 480 | 1 |
FSS-3157-1 | 10,748 | 3,150 | 600 | 1 |
FSS-4320-3 | 14,672 | 4,300 | 208 | 1 or 3 |
FSS-4324-3 | 14,672 | 4,300 | 240 | 1 or 3 |
FSS-4327-1 | 14,672 | 4,300 | 277 | 1 |
FSS-4348-3 | 14,672 | 4,300 | 480 | 1 or 3 |
FSS-4357-3 | 14,672 | 4,300 | 600 | 1 or 3 |
FSS-9520-3 | 32,414 | 9,500 | 208 | 1 or 3 |
FSS-9524-3 | 32,414 | 9,500 | 240 | 1 or 3 |
FSS-9527-1 | 32,414 | 9,500 | 277 | 1 |
FSS-9548-3 | 32,414 | 9,500 | 480 | 1 or 3 |
TPI Heavy Duty Flat Panel Emitter Electric Overhead Infrared Heater
Heavy duty overhead electric radiant heater for indoor spot heating, zone, or total area heating applications
Directional heating systems for where and when you need it.
- No element glare.
- No glass materials.
- Rigid housing & element structure.
- Designed for rugged & dirty environments.
- Delivers higher and more uniform heat output with less energy consumption.
- Ideal spot heating system for high-bay buildings up to 24'.
Features:
- High-density, medium wavelength radiant heat, with 60° symmetric heat pattern.
- Flat panel emitter operates at a radiant efficiency of 78.5%.
- Non-glare, uniform heat generating directional heat pattern.
- Rugged steel structure surrounds emitter element, great for high vibration areas.
- Gold anodized aluminum housing for efficient, long term reflectivity & corrosion resistance.
- Single or three phase wiring on select models.
- ”L” brackets included for chain suspension, or rigid mounting.
- Field wiring box mounted on each heater.
- Heavy duty wire guard factory installed.
- 25,000 hour element life expectancy.
- Shipped fully assembled
- Made in U.S.A.
Product Specifications
Housing & Construction: .040 Gold anodized Aluminum housing for efficient, long-term reflectivity and corrosion resistance. High-density radiant heat. Housing is ETL Listed for indoor, dry environment applications only. Made in U.S.A. Reflector: 60 degree symmetric heat pattern, reference the sizing chart to determine overall coverage based on the mounting height. Elements: Heavy duty flat panel emitter. Available wattages in 1450, 3150, 4300 and 9500 Watts per element. Available in standard voltages from 120 to 600 Volts. Controls: Flat panel emitter heaters are not manufactured with any control device on the unit. All controls and accessories should be specified as remote mounted. Please consult the technical sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each heater. Accessories: Power contactor panels.
ICP Control Panels
- NEMA 4 outdoor rated control box
- Door interlock disconnect switch
- Custom made to customers specifications
- SCR and proportional controls optional
- Circuit breakers sized for heater load per stage
- Please see ICP page to select panel to control one or multiple units, if required.
WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov
Weight(LBS) | 0.000000 |
---|