Seal Spray All Season Black Gun Foam - 24 oz. per Can

One-component, ready to use polyurethane gun foam for various building applications, e.g. sealing of joints and penetrations, installation of window and door frames, thermal and acoustic insulating. Ensures good results all year around. Low curing pressure and moderate post expansion avoid deformation of building elements. Adheres well to most materials like wood, concrete, stone, plaster, metal, PVC and polystyrene. View More

In stock

Product Code

SealSpray_All_Season_Black_Gun_Foam

Be the first to review this product

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Seal Spray All Season Black Gun Foam - 24 oz. per Can

Model Number	Part Description
SEALASB1	Single Can
SEALASB12	Pack of 12 Cans - No Gun
SEALASB12GC	Pack of 12 Cans, Gun, and Cleaner

Description

SealSpray All Season Black Gun Foam

One-component, ready to use polyurethane gunfoam for various building applications, e.g. sealing of joints and penetrations, installation of window and door frames, thermal and acoustic insulating. Ensures good results all year around. Low curing pressure and moderate post expansion avoid deformation of building elements. Adheres well to most materials like wood, concrete, stone, plaster, metal, PVC and polystyrene.

Features:

Fast cure at low temperatures down to 23F
Effective Air and Moisture Barrier
High thermal and acoustic insulation value
Low expansion formula
Superior insulation and sealing undercarriages on trailers, RVs, Boats, etc.
Great for Landscaping and Roofing applications

Applications:

Installation of window and door frames
Sealing of thermal and acoustic insulation boards
Insulation of penetrations
Sealing and connection of joints
Reducing the impact of thermal bridges

INSTRUCTIONS:

Application Temperature:

Air temperature during use: 23°F to 86°F, best results at 68°F.
Can temperature during application: 41°F to 77°F, best results at 68°F.
Foam can has to be warmed with water or air (max. 86°F) before starting work in low temperatures.

Surface Preparation:
Remove dust, loose particles and grease from the surfaces. Moisten dry substrate to ensure better results. Protect adjacent surfaces with paper, plastic film or other suitable material.
Application Method:
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun trigger. When applying foam in layers moisten slightly between each layer.
Cleaning:
Uncured foam can be removed with available spray cleaner, cured foam with mechanical means.

Specs:

Tack free time (TM 1014): 8-12 min
Cutting time (TM 1005): <30 min
Completely cured in joint, 3x5cm (+23 °C): <8 h
Curing pressure (TM 1009, moistened surfaces): <3 kPa
Post expansion (TM 1010): <80 %
Density in joint, 3x10cm (WGM106): 12-16 kg/m3
Temperature resistance of cured foam: -50…+90 °C
Fire class of cured foam (DIN 4102-1): B3
Tensile strength / elongation (TM 1018, dry surfaces): >80 / 19 kPa / %
Tensile strength / elongation (TM 1018, moistened surfaces): >65 / 19 kPa / %
Compression strength (TM 1011, moistened surfaces): >20 kPa
Shear strength (TM 1012, moistened surfaces): >45 kPa
Thermal conductivity (EN 12667, TM 1020): 0,033 W/(m·K):
Sound reduction index Rst,w (EN ISO 10140): 62 dB
Water vapour permeability (EN 12086): <0,06 mg/(m∙h∙Pa):
Yield for 1/4" Bead: Approx. 400 ft.
Foam yield in joint, 3x5 cm (WGM107), per 750 ml filling rate (each can is 690 ml): 18,5 m