Shurtape HP 100® General Purpose Grade Hot Melt Packaging Tape
Shurtape HP 100® General Purpose Grade Hot Melt Packaging Tape
Model Number | Roll Width | Roll Length | Color | Core Size | Rolls per Case |
---|---|---|---|---|---|
200006-ST-CS | 53mm | 100m | Clear | 3" | 36 |
104482-ST-CS | 72mm | 100m | Clear | 3" | 24 |
208465-ST-CS | 72mm | 914m | Clear | 3" | 4 |
208453-ST-CS | 48mm | 914m | Clear | 3" | 6 |
207142-ST-CS | 48mm | 100m | Clear | 3" | 36 |
Shurtape HP 100® General Purpose Grade Hot Melt Packaging Tape
General purpose grade hot melt packaging tape for manual or automated industrial sealing of lightweight cartons with minimal exposure to handling, shipping and load stress. HP 100® is engineered with an aggressive, high-tack adhesive and excellent holding power to keep carton seals intact.
Application: For manual or automated industrial carton sealing of lightweight cartons with minimal exposure to handling, shipping and load stress
Features:
- General purpose grade, light duty packaging tape
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for consistent, low force unwind off the roll
- Performs reliably to the core for efficient tape consumption
- For hand use or automated applications
- 25 micron cast BOPP film
- High-tack synthetic rubber/resin hot melt adhesive for a long-lasting, secure seal
Storage and Usage ConditionsTape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
For Additional Specs Click on a Model Number in the Below Table
All Tapes Sold by the Case
Weight(LBS) | 0.000000 |
---|