Ladder Industries Vertical Climb Stepover Crossovers
These vertical cross over stairs are designed for use use with conveyor belts. Whether your needs are to simply reach a high converyor belt on either side or need to creat a passage way over, these crossovers can be your solution. View More
In stock
Product Code
Ladder_Industries_Vertical_Climb_Stepover_Conveyor_Crossovers
Ladder Industries Vertical Climb Stepover Crossovers
| Model Number | Clearance (Vert) | Clearance (Horiz) | Tread Width | Material |
|---|---|---|---|---|
| VSO-2 | 24" | 48" | 24" | Painted Steel |
| VSO-2-2 | 24" | 72" | 24" | Painted Steel |
| VSO-3 | 36" | 48" | 24" | Painted Steel |
| VSO-3-2 | 36" | 72" | 24" | Painted Steel |
| VSO-4 | 48" | 48" | 24" | Painted Steel |
| VSO-4-2 | 48" | 72" | 24" | Painted Steel |
| VSO-5 | 60" | 48" | 24" | Painted Steel |
| VSO-5-2 | 60" | 72" | 24" | Painted Steel |
These vertical cross over stairs are designed for use use with conveyor belts. Whether your needs are to simply reach a high converyor belt on either side or need to creat a passage way over, these crossovers can be your solution.
Features:
- Frame: 1-1/2" dia. steel tube
- Steps: 2-1/2" x 24" 14 gauge diamondplate
- Top Step: 6" x 24" 14 gauge diamondplate
- Mounting: 2" x 13" foot pads with 7/16" dia. holes
- Tread Plates: 14 gauge dia. plate 1-1/4" x 3-1/2"
- Single conveyor model (48" clearance): Grab bars are 36" long
- Double conveyor model (72" clearance): Grab bars are 57" long
- Trim in field to required length
* Note: Vertical Clearance measurements for these conveyor models are measured as Top Step/Conveyor Height.
State required clearance between conveyor and bottom handrail requirements in the field above| Weight(LBS) | 0.000000 |
|---|---|
| Request Quote | No |
Write Your Own Review
Accessories and Upgrades for this Product
