Magliner Slider Ramps for Truck Underbody
Retractable Underbody Truck Ramps - Built for tough, long lasting service. View More
In stock
Product Code
Magliner_Slider_Ramps_Truck_Underbody
Magliner Slider Ramps for Truck Underbody
| Model Number | Overall Width | Length | Load Capacity | Material |
|---|---|---|---|---|
| SR2410-MAG | 24-1/8" | 10' | 1,500 lbs | Aluminum |
| SR2412-MAG | 24-1/8" | 12' | 1,500 lbs | Aluminum |
| SR2414-MAG | 24-1/8" | 14' | 1,300 lbs | Aluminum |
| SR2416-MAG | 24-1/8" | 16' | 900 lbs | Aluminum |
| SR2610-MAG | 26-3/8" | 10' | 1,500 lbs | Aluminum |
| SR2612-MAG | 26-3/8" | 12' | 1,500 lbs | Aluminum |
| SR2614-MAG | 26-3/8" | 14' | 1,300 lbs | Aluminum |
| SR2616-MAG | 26-3/8" | 16' | 900 lbs | Aluminum |
| SR3210-MAG | 32" | 10' | 1,500 lbs | Aluminum |
| SR3212-MAG | 32" | 12' | 1,500 lbs | Aluminum |
| SR3214-MAG | 32" | 14' | 1,300 lbs | Aluminum |
| SR3216-MAG | 32" | 16' | 900 lbs | Aluminum |
Retractable Underbody Truck Ramps - Lightweight ramps for trucks built for tough, long lasting service.
Features:
- Roll out quickly and store securely under truck
- Ship completely assembled for easy installation
- Lightweight for easy maneuverability
- Average installation time is 3 hours.
General Installation Info:
- 5-1/2" Minimum dimension required between truck chassis and bottom of body cross members.
- Minimum dimension required between body "U" bolts:
- 2400 Series: 25-1/4" / 2600 Series: 27-1/2" / 3200 Series: 33-1/8"
- Average installation time is 3 hours.
Lift Assist Option Reduces strain on operators by decreasing weight lifted when positioning ramp for use. Powered by two gas cylinders, the ramp adjusts easily for different chassis heights. The Lift Assist may be factory installed or field retrofit.
*Note: Ramps not made for powered equipment or pallet jack use. Recommended for hand truck use only.
| Weight(LBS) | 0.000000 |
|---|---|
| Request Quote | No |
Write Your Own Review