Kee Safety Rigid Anchor Rooftop Anchors
Kee Safety Rigid Anchor Rooftop Anchors
Model Number | Part Description | Base Plate | Type AP |
---|---|---|---|
KRA-WLD-D1-20-0658-G | Weld-On | 6" x 6" | Roof Anchor |
KRA-BLT-D1-20-1058-G | Bolt Around | 10" x 10" | Roof Anchor |
KRA-CIP-D1-20-1058-G | Cast in Place | 10" x 10" | Roof Anchor |
KRA-EPX-D1-20-1258-G | Epoxy Adhesive | 12" x 12" | Roof Anchor |
KRA-BMC-D1-20-12X0-G | Bolt On (Beam Clamp) | 12" x 12" | Roof Anchor |
Kee Safety Rigid Anchor Rooftop Anchors
Kee Rigid Anchors are the smart anchor solution for fall arrest and tie-back applications including: suspended platforms, window washing operations, equipment tie-back, and rooftop fall protection. Corrosion resistant and easy to install, all models offer insulated posts to prevent thermal bridging and condensation for long life on the building. 5 mounting options for multiple roof types.
Features:
- 5/8" Thick Base Plate
- 20" Post Height
- 4-1/2" Diameter Post filled with Polyurethane Insulation
- Hot Dipped Galvanized Finish
Variety of Applications:
- Suspended Platforms
- Window Washing Operations
- Equipment Tie-Back
- Fall Protection
- Horizontal Lifelines
Multiple Roof Types:
- Flat or Low-Slope Roofs
- BUR Membrane System
- Single-Ply Membrane
- Modified Bitumen
- Gree
- Roofs
- Metal Roofs: with underlying structures of steel, concrete or wood
MOUNTING OPTIONS:
Weld-On Rooftop Anchor: Welds directly onto new or existing structural steel. The standard Weld On range fits most common beam sizes. Best suited to new builds but can be used for retrofitting.
Bolt Around Rooftop Anchor: Bolts around structures of steel, concrete or wood using connector rods and a backer plate. For concrete deck applications, use through-bolts. Best suited to retrofit - but can be used for new build where welding is not appropriate.
Cast in Place Rooftop Anchor: Casts directly onto new concrete roof slabs of minimum grade 3000 psi and 7" thickness.
Epoxy Adhesive Rooftop Anchor: Fastens onto concrete roof slabs of minimum grade 3000 psi and 8” thickness. Best suited for retrofit.
Bolt On (Beam Clamp) Rooftop Anchor: Clamps directly onto new or existing structural steel using patented and proprietary BeamClamp® steel-to-steel connectors. Ideal for roof applications where access is limited to one side only. The standard Bolt-On range fits most common beam sizes. Best suited to retrofit but can be used in new builds.
Weight(LBS) | 0.000000 |
---|