NoTrax Electrically Insulative Type 2 PVC Diamond Tread Switchboard Matting
Diamond Switchboard Matting is a non-conductive floor matting made from a PVC compound, designed to provide insulation for the worker. The mat prevents the worker from being grounded, thereby eliminating the possibility of electrical shock. The diamond plate top surface provides increased traction and is easy to sweep clean.
Features:
- Insulated matting engineered to protect workers from electric shock
- Electrically Insulative Type 2 PVC compound
- Diamond Plate top surface - Added traction and easy to sweep clean
- Class 2 Di-electric Strength: 30,000 volts
- Proof test of 20,000 volts
- Recommended maximum use voltage: 17,000
- Each square foot of this matting is tested in conformance with ANSI/ASTM D-178 specifications
- ASTM D-178 printed on underside of mat
Specs:
- Overall Thickness: 1/4"
- Roll Size: 2’ x 75’, 3’ x 75’, 4’ x 75’
- Custom Size: Available in 2’, 3’ and 4’ widths (up to 75’ long)
It is highly recommended that the mat be replaced every 12 months for optimum performance.
For Use In front of high voltage boxes, electrical fuse boxes, transformers.
WARNING: This product can expose you to chemicals including, di (2-ethylhexyl) phthalate or diisononyl phthalate, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Note: For Mats sold by the foot, please order a quantity equal to the length in feet you would like the mat to be. For example, if you would like your mat to be 3' x 8', you would order 8 of the 3' (sold by the foot) mats.