Seal Spray Closed Cell Insulating Foam Cans and Kits - 27.4 oz. Cans
Introducing Seal Spray Closed Cell Insulating Foam Cans - the ultimate closed cell foam spray solution for sealing gaps in your home and maximizing energy efficiency. With an impressive 80% plus content, this closed cell foam insulation is not only quick and easy to apply, but it also delivers exceptional results. Unlike other foam insulation options that require mixing two components out of large canisters, Seal Spray Foam simplifies the process. With just a spray nozzle attached to the can, you can directly apply the insulating foam without any hassle. It's the perfect choice for those looking for convenience without compromising on performance.
View More
Seal Spray Closed Cell Insulating Foam Cans and Kits - 27.4 oz. Cans
| Model Number | Part Description |
|---|---|
| SEAL12GC | Pack of 12 Cans, Gun, and Cleaner (300 Board Feet) |
| SEAL24GC | Pack of 24 Cans, Gun, and Cleaner (600 Board Feet) |
| SEAL1G | Single Can and Gun (25 Board Feet) |
| SEAL2GC | Pack of 2 Cans, Gun, and Cleaner (50 Board Feet) |
| SEAL6GC | Pack of 6 Cans, Gun, and Cleaner (150 Board Feet) |
| SEAL1 | Single Can - Seal Foam gun required to use (25 Board Feet) |
| SEAL12 | Pack of 12 Cans - Seal Foam gun required to use (300 Board Feet) |
| SEAL24 | Pack of 24 Cans - Seal Foam gun required to use (600 Board Feet) |
| SEAL8GC | Pack of 8 Cans, Gun, and Cleaner (200 Board Feet) |
| SEAL1GC | Single Can, Gun, and Cleaner (25 Board Feet) |
Introducing Seal Spray Closed Cell Insulating Foam Cans - the ultimate closed cell foam spray solution for sealing gaps in your home and maximizing energy efficiency. With an impressive 80% plus content, Seal Spray Foam is not only quick and easy to apply, but it also delivers exceptional results.
Unlike other closed cell foam insulation options that require mixing two components out of large canisters, Seal Spray Foam simplifies the process. With just a spray nozzle attached to the can, you can directly apply the insulating foam without any hassle. It's the perfect choice for those looking for convenience without compromising on performance. Simply attach the included spray nozzle to start insulating. Purchases of kits with gun include an angled applicator gun that allows you to spray foam vertically for walls or overhead for ceilings. Get professional results without the mess and expense of contracted spray foam installation.
One of the standout features of Seal Spray Foam is its affordability. It costs significantly less than competitor large format kits, providing the same amount of coverage in board feet. By investing in this budget-friendly option, you can seal off those gaps in your home and start saving on energy costs without breaking the bank.
Say goodbye to the bulkiness and inconvenience of traditional two-component cylinders. With Seal Spray Foam's compact size, the closed cell foam in a can is easy to carry with you wherever you go. Whether you're working on a small project or need to tackle larger surface areas, this product wastage will become a thing of the past. No more disposing of those large tanks and no more frustration over wasted material.
But it doesn't stop there - Seal Spray Foam delivers excellence in performance too. Its 80% plus content closed-cell performance ensures a superior insulation barrier, keeping cold drafts, hot air, and moisture at bay. With this closed cell foam spray insulation, you can trust this product to provide the ultimate thermal protection for your home, ensuring maximum comfort all year round.
With its adjustable fan spray tip, Seal Spray Foam allows you to customize the application process to suit your specific needs. Whether you're spraying vertically on walls or overhead on ceilings, our included (in kits purchased with a gun) angled gun ensures a precise and efficient application every time. It's the perfect tool for both DIY enthusiasts and professional contractors alike.
What's more, our product is approved for multiple passes or layers, making it incredibly versatile. Achieve the desired R-Value easily and effortlessly, while enjoying a low cost per yield. Seal Spray Foam is designed to deliver unbeatable value without compromising on quality.
Single Can Specs:
- Capacity: 27.4 oz
- Shelf Life: 18 Months
- Yield: Up to 25 BF
- Density: up to 1.25 lbs./cu.ft (20 kg/m³)
- R Value: 4.37 h·ft²·F/Btu (0,033 W/(m·K)) at 1" Thick Layer
- Max Service Temp (cured): 77°F Can / 86°F Air
- Flame Spread: 15
- Smoke Developed: 150
| Weight(LBS) | 0.000000 |
|---|
Product Questions
- Pricey but works pretty good.This stuff is great once you get the groove of applying it. Very easy to apply on walls but a little more difficult on ceilings and angles. Definitely watch the video. Customer service was 5 star.
Posted on
- Excellent new foam option with LOTS of use casesThis type of foam has been available in overseas markets for a while, I was thrilled to see it finally available in the US.
Although they are different, it would be best to compare this to the 2-tank spray foam kits than to the rest of the "can" foams out there, because the defining feature is the projecting fan-pattern spray, as opposed to the "bead" of all other can foams. This is a must if you are trying to cover the surface of something with an inch or two or more of foam.
It _doesn't_ replace the 2-tank kits. For larger projects, they are still the right choice. But there are MANY smaller projects that might not be worth using a kit where this would be ideal. (Also, the smallest two-tank kits don't have fan tips anyway, so they are better for gaps and cracks than covering the surface of something.)
They sell this up to a roughly 600-board feet kit (24 cans) and I would probably go that far with it. More than that, and I'd likely get a couple tank kits. But where it REALLY excels is smaller projects where you might only need a couple 2 or 3 cans. The tank kits are a horrible choice for that, and this is a perfect choice.
My takeaways:
1) The foam from 2-tank kits is much more rigid when cured. This 1-component foam is basically the same as all other 1-component foam once cured. It is very firm, but does have a little bit of a rubbery "give" to it if you push on it. Not as much as most "Window and Door" versions of foam, more similar to most brands "general purpose" version. This isn't a bad thing, it is just a difference. But the rigidity of 2-tank foam is often touted for how much it stiffens up a wall. Just don't expect the same degree of rigidity from this 1-component foam.
2) Like all 1-component spray foams, this cures from moisture/humidity in the air. It will expand more and cure faster if you _very_ lightly mist it with water. This is totally not necessary (unless you are in a super dry area) but is a common property of all 1-component foams.
3) Because it is a moisture cure, it is not "fast" like the chemical cure 2-tank kits. If you've ever used Great Stuff (or comparable) you know exactly what to expect time-wise. I personally wouldn't aim for a thickness of more than 1-1.5 inches in a single pass, or it might start falling off. And you need to give it significant time to cure before you lay down a second layer. I would give it BARE MINIMUM an hour. Because the second layer will cut off air/humidity to the first layer, you want it to be done before you cover it or the first layer may not finish curing properly. Claims of "minutes to cure and recoat" are confusing this type of foam with 2-tank chemical-cure kit foam. You will ruin your foam if you try and re-spray it within 5 or 10 minutes.
4) This slower cure can actually be a benefit in many cases and I am looking forward to using it to my advantage. You can spray it, and then replace the drywall/sheathing/whatever and just let it cure behind the surface. No need to worry about trimming off excess, because you have PLENTY of time to finish spraying, and then replace the wall covering. (Make sure there is still some airflow, and that you didn't spray SO MUCH that it would then bulge out the wall. That's easy to do with regular can foam in gaps and cracks, which is why everyone makes a softer and lower expansion "Window and Door" version, but wouldn't be as easy with this. But it is still possible if you go crazy.)
5) The cans go FAST... But if the board-feet yield is accurate, you are buying it based on the price vs. board feet, not the number of cans it takes to get those board feet, so just be aware. (I can't speak to the board feet yield accuracy, because I've not done "scientific" enough tests to say. And there are so many factors that go into it.)
I wholeheartedly recommend this for many types of fan-spray foam projects. It is just important to recognize that it is not an exact substitute for the 2-tank kits. I would say they are pretty interchangeable in the vast majority of projects (size dependent) but not necessarily all. If you really need the rigidity of the tank foam, this won't give you that. Also, the tank foam does have a bit higher R-values. If you are going for a specific R-value, you'd need to factor in that you'll need a thicker coating of this (therefore more product) than if you used tank foam. If you're just going for "some insulation and a moisture/vapor barrier" I would say that's not an issue.
Thanks for bringing this to the US, Industrial Products!Posted on
