Fein 72323012635 BLK 3.5 Nibbler up to 10 Gauge

Fein 72323012635 BLK 3.5 Nibbler Up To 10 Gauge

Powerful nibbler with unlimited curve-compatibility for grooves and cut-outs.

Features:

• Best suited for grooves and cut-outs in sheet metals, tool can turn on the spot.
• Cutting direction can be adjusted in three 90° steps without the need for tools.
• QuickIN rapid change system for rapid, tool-free punch and die changes.
• Optimum power-to-weight ratio.
• Long tool life, punches can be reground.
• Motor with outstanding performance and durability.
• Warp-free cutting of flat and bent sheet metal.
• Optimally suited for template cuts.
• Chip protection mesh on vent slots.
• Handle can be rotated 180°.
• 16 ft. [5 m] cable.
• Stainless steel up to 14 gauge [1.8 mm].
• Wide range of accessories.

Includes:

• 1 cutting head
• 1 die (3 13 09 093 00 3)
• 1 punch (3 13 09 097 00 2)
• 1 wrench
• 1 handle

Specs:

• Power consumption: 1,200 W
• Power output: 750 W
• Strokes: 750 spm
• Cutting speed: 4.3 [1.3] ft/min[m/min]
• Steel 56,000 lbf/in²: 10 [3.5] gauge[mm]
• Steel 84,000 lbf/in²: 13 [2.3] gauge[mm]
• Steel 112,000 lbf/in²: 14 [1.8] gauge[mm]
• Non-ferrous metals up to 35,000 lbf/in²: 10 [3.5] gauge[mm]
• Cutting width: 9/16 [14] in[mm]
• Immersion Ø with die: 1-3/16 [30] in[mm]
• Radius of smallest curve (inside/outside): 1/4 [7] / in[mm]
• Cable with plug: 16.4 [5] ft[m]
• Weight according to EPTA: 7.72 [3.50] lbs[kg]
• Sound pressure level LpA: 85 dB
• Measurement uncertainty of the measured value KpA: 3 dB
• Sound power level LWA: 96 dB
• Measurement uncertainty of the measured value KWA: 3 dB
• Peak sound value LpCpeak: 100 dB
• Measurement uncertainty of the measured value KpCpeak: 3 dB
• Vibration value 1 αhv 3-way: 8,9 m/s²
• Measurement uncertainty of the measured value Kα: 1,5 m/s²