UltraTech - Ultra-Containment Berm Rapid Rise Model - Copolymer 2000

Sidewalls stay lowered and out of the way until they are needed.  Foam in the top, outer perimeter of this containment berm's sidewalls raise the walls with the level of the liquid should there be a spill.  But the walls stay down and flat during normal, day-to-day, operations.  Helps comply with SPCC and EPA spill containment regulations.

• Sidewalls remain down during normal operations, loading and unloading. Vehicles and equipment can drive in and out with no set-up or take-down required
• In the case of a spill, the foam ring around the top perimeter of the Containment Berm rises with the level of spilled liquid.
• Provides quick and easy spill containment for drums, IBCs, vehicles, frac tanks and other large containers.
• Helps meet EPA Container Storage Regulation 40 CFR 264.175 and SPCC requirements.
• Custom sizes available.
• Built-in handles help with transport and placement.
• Available in PVC and Copolymer 2000.

* Please note that because the sidewalls of this model lay inward (toward the center of the Berm), usable space is 15 inches less than what is shown in the product description (e.g. Usable space for a 10' x 10' Berm is approximately 8'9" x 8'9")

WARNING: This item can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known to the State of California to cause Cancer, Birth Defects, or Reproductive Harm. For more information visit www.P65Warnings.ca.gov.