Accuform ANSI Notice Safety Label: Avoid Contamination - Wash Your Hands

Accuform ANSI Notice Safety Label: Avoid Contamination - Wash Your Hands

Highlight the importance of washing hands to prevent contamination with this label.

Features:

• Remind employees that washing their hands prevents contamination
• Large pictogram presents the message for non-English speakers
• Newer ANSI-style signs and labels are gaining in popularity and are recognized by OSHA as an acceptable safety notification device
• Notice header indicates information considered to be important but not hazard-related

Note: Adhesive Vinyl Labels are Sold in Packs of 5, while the Adhesive Dura-Vinyl Labels are Sold Individually

Material Options:

Adhesive Vinyl:

• Flexible vinyl with acrylic adhesive
• Non-glare surface printed
• Moisture resistant
• Service temperature range: -40° to 176°F

Plastic

• Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2
• Polyethylene plastic with matte surface
• Impact resistant with slight flexibility
• Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
• Service temperature range: -90°F to 168°

Adhesive Dura-Vinyl

• Flexible poly-composite material with UV protective laminate
• Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight
• Permanent, acrylic adhesive back with peel-off liner
• Adheres to: smooth, curved, and irregular surfaces
• Service temperature range: -40° to 176°F

Aluminum

• Withstands splashes and washdowns
• Endures outdoor environmental conditions
• Service temperature range: -40° to 250°F
• Provides the strength of metal, yet never rusts
• Assorted material thicknesses are available
• Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes

Dura-Plastic™

• Semi-rigid polycarbonate material
• Protected by Duck Armor™ Liquid Laminate
• Resists abrasion, humidity, and chemicals
• Service temperature range: -50° to 190°F
• Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes

Aluma-Lite™

• Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more
• Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity
• Protected by Duck Armor™ Liquid Laminate
• Service temperature range: -40° to 176°F

Dura-Fiberglass™

• Printed on rigid Fiberglass material and protected by Duck Armor™ Liquid Laminate
• Will not crack or chip as a result of exposure to extreme environments – even outdoors!
• Can be cut to most any shape
• Impervious to mold, mildew, stains, and rust
• Service temperature range: -40° to 248°F
• Fiberglass withstands abrasions, impacts, corrosion, and chemicals
• Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
• WARNING: This product can expose you to STYRENE which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Accu-Shield™

• Two-ply, polycarbonate plastic with industrial-strength backing
• Resists fading, chemicals, corrosion, abrasions, cracking, and chipping
• Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface
• Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes
• Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F
• WARNING:This product can expose you to chemicals including BENZENE which is known to the State of California to cause cancer and birth defects or other reproductive harm, ETHYLBENZENE and ACETALDEHYDE which are known to the State of California to cause cancer, and TOLUENE which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.