Cotterman Steel Rolling Track Ladder - Track Height: 10'5" to 11'3"

Steel Mounted Shelf Ladder

Designed primarily for warehouse or industrial use, these versatile Steel Track Ladders can also be adapted for use in the modern home or office. They are available in gray, black, beige, dark brown,and safety yellow.

Easy access to shelves in narrow aisles and cramped storage areas.

These ladders have a smooth rolling upper track fixture and wheels on the floor that allow easy movement of the ladder along the entire length of the track. The upper rolling trolley fixture is mounted on straight track at the front shelf edge. The rugged all-welded steel construction featues 5" deep by 14" wide solid steps with abrasive treads.

Quick access... easy to use... easy to store

When in use, the ladder is positioned at an 80° climbing angle. The standard bottom wheel brake prevents movement during use. An exclusive design permits storage of the ladder in a tight vertical position against the shelves when not in use and allows easy passage of persons or equipment in the aisle.

This Steel Library Ladder is shipped ready for installation - no cutting or drilling required!
Includes:

• Steel track ladder
• 10' Track Sections (can be cut down to size)
• End brackets
• Center brackets
• Mounting and rolling hardware (Black finish only)

Dimension and Installation Characteristics:

• 300 lb Capacity
• Swings in at the bottom when not in use to occupy less than 9" of aisle space
• Angle with floor is 80°
• Ladders project above the top of track 4"
• The track is normally placed in line with a shelf no more than 3 feet below the top of the highest merchandise to be reached
• One ladder is recommended to every 20 or 30 feet of track.
• The horizontal distance from the lace of the protruding merchandise to the center line of track should be more than 1 1/2" to clear the upper fixtures.
• Brackets should never be installed by screwing directly into the front edge of plywood uprights or shelves because the fastening strength may in insufficient.

Mounting Brackets

Please select the mounting bracket type and track height in inches - no fractions of an inch. The ladder will be custom made to your specifications, so please be accurate.All sales are final. This product is non-returnable.

L10: For fastening on top or under side of shelving, generally with pan head screws.
L11: Similiar to L10, but allows up to 2 1/2" of additional space between track and face of shelving.
L11-T: For mounting on the vertical side of an upright, allows 4-3/4" space between track and face of shelving.
L15: For mounting on front edge of upright.
L17: Same as L15 but provides 1 5/8" additional space between track and face of shelving.
L56: For mounting on front edge of shelf where other brackets cannot be used. Compatible with L15 brackets, can be used as intermediate to L15 where uprights are spaced greater than 4 feet. Made in 2 parts for convenience in mounting. L56 Brackets are 3-1/2"L x 3/4"H.