Seal Spray Gap and Crack Filler High Performance Spray Foam - 24 oz. Can

Seal Spray Gap and Crack Filler High Performance Spray Foam - 24 oz. Can

One-component, ready to use polyurethane gunfoam for various building applications, e.g. sealing of joints and penetrations, installation of window and door frames, thermal and acoustic insulating. Ensures good results in winter conditions. Low curing pressure and moderate post expansion avoid deformation of building elements. Adheres well to most materials like wood, concrete, stone, plaster, metal, PVC and polystyrene.

Features:

• Extra high yield allows doing more work with one canister (up to 4,000 feet when applied with a 1/4" bead)
• Suitable for use at colder temperatures
• High thermal and acoustic insulation value

Field of applications:

• Sealing and connection of joints
• Insulation of penetrations
• Installation of window and door frames
• Sealing of thermal and acoustic insulation boards
• Reducing the impact of thermal bridges

APPLICATION INSTRUCTIONS:

Application Temperatures:

• Air temperature during use: 5°F to 86°F
• Can temperature during application: 41°F to 77°F, best results at 68°F.
• Foam can has to be warmed with water or air (max. 86°F) before starting work in low temperatures.

Surface preparation: Remove dust, loose particles and grease from the surfaces. Moisten dry substrate to ensure better results (only if temperature is above zero degrees). Protect adjacent surfaces with paper, plastic film or other suitable material.

Application method: Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun trigger.
When applying foam in layers moisten slightly between each layer (only if temperature is above zero degrees).

Cleaning: Uncured foam can be removed with acetone, cured foam with mechanical means.

Limitations: The foam does not adhere to Teflon, polyethylene and silicon surfaces. Cured foam is sensitive to UV-light and direct sunlight and therefore must be covered with suitable opaque sealant, filler, paint or other material.

Safety regulations: Use only in well-ventilated areas. Do not smoke during application! Use protective gear when necessary. Keep out of the reach of children. See label and safety data sheet (SDS) for more information.

For best results when spraying Seal Spray Foam in an overhead application, please use our angled gun - Item # SEALGUNA1

Features and Benefits:

• Cures In Temps As Low As 5 Degrees F
• High Closed Cell Content
• High Expansion - High Yield

Applications:

• Cold Rooms
• Winter Construction
• Filling Gaps And Cracks
• Freezers And Refrigerated Vehicles

Specs:

• Can Size: 24 oz
• Yield Per Can: 1/2" Bead = 1025 ft / 1/4" Bead = 4100 ft
• R-Value @ 1": 6
• Closed Cell Content: 75-90
• Shelf Life in Months: 24