Justrite Make-A-Berm Customizable Spill Containment Berms

Make-A-Berm™ is a fit for most application needs. It can easily be installed on site to fit the layout without having to move existing equipment. Connect multiple berm pieces to fit your containment area. Non-absorbent modified PVC coated fabric provides a highly resistant barrier to contain oils, gasoline, acids and other liquids. For a liquid-proof seal, a semi-permanent installation to the floor is available with the use of polyether-based adhesive. Flexible foam inserts are crush resistant and return to their original shape with no memory loss after foot traffic or hand truck equipment use.

• Straight pieces can be linked together or combined with corners to create a complete containment solution.
• Vented Corners release air when berm is compressed to prevent damage - ideal for wheeled traffic.
• Vertical corners allow for a fully sealed containment on walls or vertical machine areas.
• Heavy Duty berms use heavier duty PVC coated material along with aluminum strips to withstand vehicle traffic.
• Drain is made to fit multiple size configurations.
• HH-66 Vinyl Cement is used to adhere sections of berm together
• Sili-Thane 803 Adhesive and Sealant is used to adhere berms to the floor, wall, or machinery

WARNING: These products can expose you to chemicals including silica, crystalline and titanium dioxide, which are known to the State of California to cause cancer, methanol and toluene, which are known by the state of California to cause birth defects or other reproductive harm, and diisononyl phthalate, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.