Lapeyre Galvanized Carbon Steel Alternating Tread Stair with Standard Handrail
- 10+
Estimate Shipping
Description
The Lapeyre alternating tread stair is a code-compliant replacement for a fixed vertical ladder where there isn't room for a conventional stair. Its patented tread geometry lets you climb and descend facing forward while occupying a fraction of the floor space a standard stair would need. This configuration is built in galvanized carbon steel with a standard handrail.
Hot-dip galvanized carbon steel for outdoor, washdown, and corrosive service. The zinc coating protects cut edges and welds, making this the right pick for exterior tank access and wet process areas.
Standard handrail. Full-height 42" handrail on both sides — the default choice for general industrial access and the most common OSHA configuration.
Why an alternating tread stair
- Occupies up to 40% less floor space than a conventional stair at the same rise
- Users climb and descend facing forward — safer and far less fatiguing than a vertical ladder
- Meets OSHA 1910.25 and IBC Industrial requirements, so it can replace a ladder without a variance
- Perforated treads shed liquid and debris for secure footing in wet or oily areas
- 1,000 lb load capacity
- Built to your exact rise and held to 1/8" tolerance — no field cutting or shimming
- Bolt-together assembly, no welding required on site
- Patented design manufactured in the USA since 1981
Configure this stair
| Material / finish | Galvanized Carbon Steel |
|---|---|
| Handrail type | Standard — Full-height 42" handrail on both sides — the default choice for general industrial access and the most common OSHA configuration. |
| Stair angle | 56° and 68° (select above) |
| Stair rise | 3' to 20' in 6" steps (select above) |
| Tread style | Perforated |
| Tread depth x width | 10.5" x 9" |
| Stair width | 20" |
| Overall width | 23" |
| Handrail height | 42" |
| Capacity | 1000 lbs |
| Compliance | OSHA, IBC Industrial |
| Riser type | Open |
| Country of origin | USA |
Available stair rises
35 rises available in this configuration: 3', 3' 6", 4', 4' 6", 5', 5' 6", 6', 6' 6", 7', 7' 6", 8', 8' 6", 9', 9' 6", 10', 10' 6", 11', 11' 6", 12', 12' 6", 13', 13' 6", 14', 14' 6", 15', 15' 6", 16', 16' 6", 17', 17' 6", 18', 18' 6", 19', 19' 6", 20'.
Measure from the lower finished floor to the top landing surface. If your rise falls between two listed values, or you need a rise outside this range, we can order it built to your exact dimension — contact us for a quote.
Important safety note
An alternating tread stair is an access product, not fall-protection equipment. It does not replace guardrails, a fall-arrest system, or a safety gate at the top landing where those are required.
Configuration: Galvanized Carbon Steel / Standard handrail
Specifications
| Material | Galvanized Carbon Steel |
|---|---|
| Code Compliance | OSHA, IBC Industrial |
| Tread Width | 9" |
| Tread Depth | 10.5" |
| Tread Style | Perforated |
| Overall Width | 20" |