PS Industries EdgeHalt® Full Height Ladder Safety Gates - Powder Coated Yellow

The patent-pending, new EdgeHalt® Full Height Ladder Safety Gate has been redesigned by combining two of our flagship EdgeHalt Ladder Safety Gates – one standard gate on top and one traveler gate with an integrated toeboard below – to provide a complete OSHA- and ANSI-compliant full-height safety solution. It features innovative Slam Proof® technology that closes each gate in a quiet and controlled manner, extending the life of the product. Plus, it features up to 10" of adjustability, allowing you to cover a range of openings from 15" to 50" with just four gate sizes. Best of all, the springs have been tested to more than one million cycles and are guaranteed for the life of the gate.

Engineered and tested to meet or exceed OSHA, ANSI and Canadian COHS standards (OSHA 1910.29; OSHA 1910.28; ANSI A1264.1-2017; ANSI A14.3; Canada COHS SOR-86-304 Part II)

Do I need to order an adapter bracket?
No, adapter brackets are optional. EdgeHalt Ladder Safety Gates ship fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) and square tubing (up to 2" x 2" O.D.). If mounting to angle iron, flat bar or nonstandard railing, gate bolts directly to railing/wall (hardware not included) or by purchasing and using a no-drill adapter bracket kit.

Features:

• Slam-Proof® Technology – A unique damping system that provides safety to the operator while the gate is closing. It controls speed, reduces noise and adds life to the gate (ready for future OSHA standards regarding slamming).
• Meets Or Exceeds OSHA / ANSI / Canadian COHS Standards – Proven safety for your team (OSHA 1910.29; OSHA 1910.28; ANSI A1264.1-2017; ANSI A14.3; Canadian COHS SOR-86-304 Part II).
• Adjustable For Easy Installation – 10" of adjustability make it simpler to install in different openings around your facility.
• Springs Guaranteed For Life Of Gate – Tested to exceed more than one million cycles, you can feel good that the springs on your gate will likely outlast everything around them.
• Simple installation – The simple design with Quick Start Guide makes it easy to install in minutes. If mounting to angle iron, flat bar or nonstandard railing, gate bolts directly to railing (hardware not included) or by purchasing and using a no-drill adapter bracket kit. Call for details.
• Always In Place – Self-closing to protect employees from dangerous falls.
• Available In 3 Finishes – Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL) and 304 Stainless Steel Seal Welded (304SW).