Garlock RailGuard 200 Non-Penetrating Safety Guardrail Systems
RailGuard 200 Safety Rail Non-Penetrating Railing System
From the leaders in Passive Fall Protection, Garlock RailGuard 200 Safety Rail systems protect employees or any contractor/ serviceman who may not be familiar with your Safety Policy requirements. With a passive guardrail system installed, you will have peace of mind that fall protection safety is always in place.
For more than 30 years, the Garlock RailGuard 200 non-penetrating safety railing has been protecting workers at-height. RailGuard exceeds OSHA requirements for temporary and permanent guardrail applications for fall protection security.
NON-PENETRATING: Maintain rooftop integrity with the weighted base design. Simply place the guardrail base in the desired location, drop in the rail section and pin it. No tools or drilling required.
CUSTOMIZABLE: RailGuard is available in 3 standard sizes with your choice of finish. For that last section or obstacle, select an adjustable rail section. Add a self-closing or swing gate to complete your fall protection system.
NOT JUST FOR ROOFTOPS: Garlock RailGuard 200 safety rail systems can also be used for loading docks/pits, mezzanines, or machine guarding. A variety of permanent base mounting styles are available. Let your Garlock Representative help you build a solution for your passive fall protection needs.
EASY AS 1-2 -3 : Measure jobsite, then simply:
1. Count the number of rail sections including outriggers. (Tip use 10'. sections for as much as possible, and 5' for outriggers)2. Order the same amount of bases + (1) for end.3. For every base, order (2) pins
Base Plate
- Mounts up to four rail sections
- Allows 90° or 45° turns
- Narrow 3-1/4" space between rails
- 90 lbs.
Rail Sections
- Top Rail Height = 42" tall
- Mid-Rail Height = 20" tall
- Three standard lengths: 1'’, 7' 6", 5'
- Custom sizes and colors available
- Standard rail section 16 ga. welded steel.
Usage Recommendations
1. End all configurations with either a closed loop that connects all bases and rail sections, or the use of a 5 foot Outrigger System to provide the needed counterbalance.2.Configurations with Outrigger Systems require one additional base.3. Locking pins must be used to secure all rails into the bases.4. Use toe boards when there is a danger of materials falling
Railguard 200 Adjustable Safety Rails
Made to adjust for the last section of safety guardrail to give your system a perfect finish. Available in 4 different sizes.
Adjustable Toe Boards
Toe-boards should be used for applications with no parapet where debris can be kicked and fall. Telescoping steel 2×4 fits base. Four lengths available.
See Accessories Below for more Transport and Storage Solutions for the RailGaurd 200 System inluding: Centurion Cart, Base Transporter, Goliath Base Storage, Goliath Winch, and Goliath Mega Cart