Rear View Safety MV1 Backup Cameras

The MV1 Backup Camera can mount either to the side of the vehicle as a side camera or on the back of a vehicle as a backup camera. Its small size and OEM look make this a very popular camera choice. The camera is very easy to install and makes hitching and backing up easy. View More
In stock
Product Code
Rear_View_Safety_MV1_Backup_Cameras
As low as $131.01

Rear View Safety MV1 Backup Cameras

Model Number Camera Style Cable Length Connection
RVS-MV1-01 Backup 66' 5-Pin
RVS-MV1-02 Backup 33' 5-Pin
RVS-MV1-03 Backup 16' 5-Pin
RVS-MV1-04 Backup 66' RCA Adapter
RVS-MV1-05 Backup 33' RCA Adapter
RVS-MV1-06 Backup 16' RCA Adapter
RVS-MV1-NC Backup No Cable None
RVS-MV1-N-01 Forward Facing 66' 5-Pin
RVS-MV1-N-02 Forward Facing 33' 5-Pin
RVS-MV1-N-03 Forward Facing 16' 5-Pin
RVS-MV1-N-04 Forward Facing 66' RCA Adapter
RVS-MV1-N-05 Forward Facing 33' RCA Adapter
RVS-MV1-N-06 Forward Facing 16' RCA Adapter
RVS-MV1-N-NC Forward Facing No Cable None
RVS-MV1-L-01 Left Side (Driver) 10' 5-Pin
RVS-MV1-L-02 Left Side (Driver) 10' RCA Adapter
RVS-MV1-R-01 Right Side (Passenger) 10' 5-Pin
RVS-MV1-R-02 Right Side (Passenger) 10' RCA Adapter

Rear View Safety MV1 Backup Cameras

The MV1 Backup Camera can mount either to the side of the vehicle as a side camera or on the back of a vehicle as a backup camera. Its small size and OEM look make this a very popular camera choice. The camera is very easy to install and makes hitching and backing up easy. Camera comes with cable (select length from dropdown) and the option for a HD rear camera 5-pin connection (to connect to our systems) or an RCA adapter (to connect to an external display).

Note: If you choose the left or right camera type, the connection will be female.

Note: In order to install this camera you must use the 3M adhesive to attach the camera to the back/side/front of the vehicle and drill a 3/8" hole for the cable. Secure the camera from the inside with the included washers.

Features:

  • Mounts flush against vehicle
  • 150° all-encompassing angle
  • Compact design
  • Excellent night vision
  • Completely waterproof - IP68 rating

Mv1 Backup Camera
The MV1 Backup Camera is built with an MT9V139 sensor and a lens with an ultra wide viewing angle of 150°. It's tiny size (less than an inch long, wide and deep) makes it ideal for smaller vehicles and allows its installation to be virtually invisible. It mounts flush against the vehicle and with an IP68 rating is fit to operate in almost all weather conditions.

More Information
Weight(LBS)0.000000
Request QuoteNo
Write Your Own Review
You're reviewing:Rear View Safety MV1 Backup Cameras
Your Rating
Copyright © 2026 - present Industrial Products. All rights reserved.