Seal Spray Black Gun Foam - 24 oz. per Can

Seal Spray Black Gun Foam

One-component expanding foam is a ready to use polyurethane black foam spray used for various building applications, e.g. sealing of joints and penetrations, installation of window and door frames, thermal and acoustic insulating. This black spray foam insulation ensures good results all year round. Low curing pressure and moderate post expansion avoid deformation of building elements. Adheres well to most materials like wood, concrete, stone, plaster, metal, PVC and polystyrene.

Features:

• Fast cure temperatures down to 41°F
• Effective Air and Moisture Barrier
• High thermal and acoustic insulation value
• Low expansion formula
• Superior insulation and sealing undercarriages on trailers, RVs, Boats, etc.
• Great for Landscaping and Roofing applications

Applications:

• Installation of window and door frames
• Sealing of thermal and acoustic insulation boards
• Insulation of penetrations
• Sealing and connection of joints
• Reducing the impact of thermal bridges

INSTRUCTIONS:

Application Temperature:

• Air temperature during use: 41°F to 86°F, best results at 68°F.
• Can temperature during application: 41°F to 77°F, best results at 68°F.
• Foam can has to be warmed with water or air (max. 86°F) before starting work in low temperatures.

Surface Preparation:
Remove dust, loose particles and grease from the surfaces. Moisten dry substrate to ensure better results. Protect adjacent surfaces with paper, plastic film or other suitable material.

Application Method:
Shake the can vigorously at least 20 times. Hold the foam can in upright position, turn the gun to the can by holding the gun handle with one hand, and turn the can with the other hand. Make sure that the gun is not pointed at other persons when turning it. The can must not be screwed to the gun with the valve upside down or by turning the gun on the can. Turn the can upside down and start applying. The foam output can be adjusted by the gun trigger. When applying foam in layers moisten slightly between each layer.

Cleaning:
Uncured foam can be removed with available spray cleaner, cured foam with mechanical means.

Specs:

• Tack free time (TM 1014): 8-12 min
• Cutting time (TM 1005): <30 min
• Completely cured in joint, 3x5cm (+23 °C): <8 h
• Curing pressure (TM 1009, moistened surfaces): <3 kPa
• Post expansion (TM 1010): <80 %
• Density in joint, 3x10cm (WGM106): 12-16 kg/m3
• Temperature resistance of cured foam: -50…+90 °C
• Fire class of cured foam (DIN 4102-1): B3
• Tensile strength / elongation (TM 1018, dry surfaces): >80 / 19 kPa / %
• Tensile strength / elongation (TM 1018, moistened surfaces): >65 / 19 kPa / %
• Compression strength (TM 1011, moistened surfaces): >20 kPa
• Shear strength (TM 1012, moistened surfaces): >45 kPa
• Thermal conductivity (EN 12667, TM 1020): 0,033 W/(m·K):
• Sound reduction index Rst,w (EN ISO 10140): 62 dB
• Water vapour permeability (EN 12086): <0,06 mg/(m∙h∙Pa):
• Yield for 1/4" Bead: Approx. 400 ft.
• Foam yield in joint, 3x5 cm (WGM107), per 750 ml filling rate (each can is 690 ml): 18,5 m

For best results when spraying Seal Spray Foam in an overhead application, please use our angled gun - Item # SEALGUNA1

Features and Benefits:

• Black In Color
• Cures In Cold And Warm Environments
• High Closed Cell Content

Applications:

• Landscaping And Pond Applications
• Vehicle Frames and Bodies
• Stage Productions - Set Design

Specs:

• Can Size: 24 oz
• Yield Per Can: 1/2" Bead = 925 ft / 1/4" Bead = 3700 ft
• R-Value @ 1": 5
• Closed Cell Content: 60-70
• Shelf Life in Months: 18

NOTE: Free Shipping Included for 12 Pack of Cans and 12 Pack of Cans with Gun and Cleaner. Single can does NOT ship free.