Justrite 28190 - Prosolv Recycling System for Disposal of Calibration Gas Cylinders
Prosolv provides a safe and economical way to dispose of calibration gas cylinders. Complies with: EPA 40CFR 261.23(a)(6)
Calibration gases are widely used by an array of industrial and commercial facilities to calibrate gauges that measure gases such as ammonia, methane, carbon dioxide, carbon monoxide, and dozens of other specific gases.
After use, calibration gas cylinders should be properly disposed. This simple to use, manually-operated venting device removes the sealing sleeve and internal valve stem from propane, mapp, and 3/4" (1.9cm) male threaded calibration gas cylinders (not to be used with oxygen bottles).
It empties and filters the propellant, taking the cylinder from a hazardous to a non-hazardous state. Rather than incurring costs associated with hazardous waste disposal, users can now recycle the cylinders as scrap steel. The system results in a cost savings to businesses and benefits the environment as well.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
| Weight(LBS) | 8.000000 |
|---|