Sumner Series 2100 Contractor Lifts with Options

Unmatched as a good all around contractor lift, the Series 2100 features taller mast to reach desired work heights while requiring fewer mast sections; hence, the 2100 is less expensive and lighter. The base, forks, winch, etc. are the same as the 2000.

Features:

• Loading Bar - great for overhead cranes
• Pulley Guards prevent cable from coming off
• Reversible forks
• Plunger pins for quick readjustment and compact storage
• No tools needed - no loose parts
• Variety of attachments
• Large 7/32" (5.5mm) load cable
• Load cable feeds inside mast (no more exposed cable just inches away from operator's face.)

Options:

Cable Stay Brake (#783663)
Each mast and carriage can have a factory installed, gravity actuated safety brake which holds loads in place in the event the cable should go slack.

Pipe Cradle (#783705)
Great for duct pipe or other HVAC applications. Slides over standard forks. Packaged in sets of two.

Boom Carriage (#783642)
Ideal for installing pipe or lifting “from the top” applications. Uses four attaching plunger pins and has a 40" (100 cm) reach. Hook has five locations with load capacities of 650 lbs (300 kg), 525 lbs (240 kg), 425 lbs (195 kg), 300 lbs (135 kg) and 200 lbs (90 kg).

Fork Extensions (#783691)
With the push of a button, forks may be extended from 28" to 42" (71–106 cm). With longer forks, the weight capacity decreases to 200 lb (90 kg) and is clearly shown on the forks when extended. A second button returns the extension for convenient storage inside the forks. 

Two Speed Winch Handle Kit (Factory Installed #783765)
The two speed winch handle offers a standard speed setting or a high speed setting for quickly positioning forks in half the time. Available only on Series 2100 lifts commencing with serial number 9433. For field installation kit, use part #783761.

Foot Jack (#784070)
Optional Foot Jack allows user to easily fold the legs of the lift up or down without laying the lift on it's back.

Tray (#786320)
Great for HVAC applications and positioning transformers and junction boxes. Steel tray slides onto forks.

STANDARD ACCESSORIES (unless otherwise noted):

Sumner-built Winch
Highly reliable, single-speed winch uses idler roller to feed four rollers to feed cable evenly on the drum to avoid cable flats

Lockable 5" Casters
Hard tread urethane wheels with Delrin® bearings.

Roller Wheels
Helps to roll into trucks or vans

Reversible Forks
By pulling plunger pins, forks can be repositioned for added height or just to get flush with the ceiling.

Fast Action Stabilizer Legs
Mounted on base top, stabilizer legs fold down with ease and lock in place. The Series 2100, 18' and 24' models come with stabilizer legs (optional on Series 2000: 10' and 15' models, and Series 2100 12' models.).

Ideal for compact storage
No tools or loose hardware to worry about. Leg lock mechanism releases with the push of a button and locks in the stored position. Leg rollers allow lift to be wheeled around. Forks remove by pulling plunger pins.

10" Rough Terrain Wheels
Makes loading a truck or van hassle free (optional)