Jameson Duct Hunter Detectable Fiberglass Rodders 1/4"

1/4" diameter rod has 4" bend radius and is recommended for 1-1/2" - 3" conduit. Traceable Rodder Locates Underground Pipe Without Digging. View More
In stock
Product Code
Jameson_Duct_Hunter_Detectable_Fibergalss_Rodders_1/4"

Scroll down to the table below or click the Choose Options button to select a model to add to your cart

Jameson Duct Hunter Detectable Fiberglass Rodders 1/4"

Grouped product items
Model Number Diameter Length Part Description Price Qty
16-14-300M 1/4" 300' Standard Marked
$1,410.99
16-14-300MM 1/4" 300' Metric Marked
$1,410.99
16-14-400M 1/4" 400' Standard Marked
$1,569.49
16-14-500M 1/4" 500' Standard Marked
$1,711.49
16-14-600M 1/4" 600' Standard Marked
$1,895.99
16-300RRM 1/4" 300' Standard Replacement Rod on Reel
$1,007.99
16-300RRMM 1/4" 300' Metric Replacement Rod on Reel
$1,007.99
16-400RRM 1/4" 400' Standard Replacement Rod on Reel
$1,120.49
16-400RRMM 1/4" 400' Metric Replacement Rod on Reel
$1,120.49
16-500RRM 1/4" 500' Standard Replacement Rod on Reel
$1,287.99
16-500RRMM 1/4" 500' Metric Replacement Rod on Reel
$1,287.99
16-600RRM 1/4" 600' Standard Replacement Rod on Reel
$1,353.99
16-600RRMM 1/4" 600' Metric Replacement Rod on Reel
$1,353.99

1/4" diameter rod has 4" bend radius and is recommended for 1-1/2" - 3" conduit. Traceable Rodder Locates Underground Pipe Without Digging. Less Disruption To Roads And Landscapes. Minimal Pavement Breakage, Excavation or Restoration.
Using a transmitter to energize Duct Hunter, rod is pushed into underground pipe to emit signal that is picked up by receiver above ground. This allows entire buried utility pipe to be traced and marked continuously from above ground by one man without digging. Rod's ferrule attaches to sonde, roller guide or pulling eye.

  • Trace to depths up to 10'.
  • Locate sewer laterals to confirm no cross bore has occurred.
  • Locate ductile iron, plastic, tile or concrete pipe.
  • Accessory kit included.
  • Bend Radius: 5/16" Rod has 6" Bend; 7/16" Rod has 9" Bend.

Jameson EZ-Reel Pre-loaded Rod Replacements

Replacement Rods come pre-loaded on replacement reels to eliminate common problems associated with Re-Rodding an existing reel.

Jameson Buddy® Conduit Rodders and Fish Tapes are the most durable in the market, but we know job sites can be extremely tough. Using our repair kits, customers are often able to splice rod or repair end-fittings to keep their rodders in service. However, on occasion it may be necessary to replace the entire spool of rod due to more severe damage. Removal, disposal and rod replacement can be a difficult and time-consuming task. Responding to customer feedback, Jameson introduced EZ-REEL™ pre-loaded replacement reels which help improve speed and safety of replacing damaged rod material.

Features:

  • Rod is pre-loaded at the factory in a production reel
  • No need to handle the rod for installation or disposal
  • Swap the old reel for the new one, keep the existin rodder frame in service with quick downtime.
  • No need to cut up old rod into short lengths
  • Dispose of entire old reel with rod remaining inside
  • EZ-Reel is provided with rod, reel, replacement hardware, and instructions

* Note: These 1/4" Diameter Replacement Rod Reels only work with 1/4" Easy Buddy Series and 1/4" Duct Hunter Rodders Manufactured Starting November 2018. Previous models are not made with removable axles and reels

Product Questions

No questions yet. Be the first to ask the question!
Write Your Own Review
You're reviewing:Jameson Duct Hunter Detectable Fiberglass Rodders 1/4"
Your Rating
Copyright © 2024- present Industrial Products. All rights reserved.