Weather Guard Sliding Truck Beds | 2,000 lb Bed Slide
- 10+
Estimate Shipping
Description
Your Gear. One Slide Away.
The WEATHER GUARD® Sliding Truck Bed turns the hardest-to-reach part of your truck into the easiest. With a full 100% extension, the deck rolls all the way out past the tailgate and brings tools, materials, and equipment to a comfortable working height. No climbing over rails, no crawling toward the bulkhead, no dragging a heavy case the length of the bed.
For crews making a dozen stops a day, those saved seconds add up fast. And because loading and unloading happens at waist level instead of at full stretch, your team finishes the day with less strain on their backs, shoulders, and knees.
Flat Deck. Full Access.
The load surface is true flat from edge to edge, with a tough bed-liner finish that grips cargo and stands up to jobsite abuse. Nothing sticks up to catch a corner or block a slide, so you can push, stack, and strap however the load demands. An exclusive center C-channel runs the length of the deck and locks down oversized or awkward loads, while four tie-down points give you plenty of anchor options for everyday gear.
Built for Pros
This is a heavy-duty steel bed slide, not a light-duty cargo tray. Every unit is rated for up to 2,000 lbs, rides on high-performance steel rollers, and ships powder coated for corrosion resistance. The intuitive handle latching system locks the deck in place for transit and releases cleanly when it is time to work, so drivers can operate it safely with gloves on and a load in hand.
- 100% bed extension for full access from the ground
- 2,000 lb load capacity on both models
- Heavy-duty steel construction with high-performance steel rollers
- Powder coated for corrosion resistance
- 4 tie-down points plus a full-length center C-channel
- Removable side rails for oversized gear or flush-top installs
- Limited lifetime warranty
Customize It to Your Setup
Pull the side rails off to make room for wider gear, or run the deck flush-top to integrate with headache racks, toolboxes, ladder racks, and other upfit equipment. The Sliding Truck Bed is designed to be part of a complete work truck build rather than a standalone accessory.
Choose Your Size
Two deck lengths cover most pickup applications. Match the model to your bed length before ordering, and check fitment for your year, make, and model if you are unsure.
| Part Number | Length | Width | Height | Product Weight | Capacity | Extension |
|---|---|---|---|---|---|---|
| SB65-52-01 | 65 in. | 49.2 in. | 13.2 in. | 410 lb | 2,000 lb | 100% |
| SB75-52-01 | 75 in. | 49.2 in. | 13.2 in. | 450 lb | 2,000 lb | 100% |
Both models are steel, finished in black, and backed by the WEATHER GUARD limited lifetime warranty.
Frequently Asked Questions
How much weight can the Weather Guard Sliding Truck Bed hold?
Both the SB65 and SB75 are rated for loads up to 2,000 lbs.
Does it extend all the way out of the bed?
Yes. Both models offer 100% extension, so the entire deck clears the tailgate and the full load surface is accessible from the ground.
Which size do I need?
The SB65 has a 65 in. deck and the SB75 has a 75 in. deck. Both are 49.2 in. wide and 13.2 in. tall. Choose the model that matches your truck bed length.
Can I remove the side rails?
Yes. The side rails come off to accommodate larger gear or to create a flush-top install alongside other equipment.
Is it covered by a warranty?
Yes. The Sliding Truck Bed is backed by a WEATHER GUARD limited lifetime warranty.
