Werner OBEL Series Fiberglass Single Sided Step Ladders
The Old Blue Series Electrician's ladder is not your ordinary Step Ladder -- it's a Jobstation. These Jobstations save time and increase productivity on the job. With a duty rating of 375 pounds, the Old Blue series features a customized HolsterTop with ToolLasso sockets to accommodate even more tools.
In stock
Product Code
Werner_OBEL00_Series1
Werner OBEL Series Fiberglass Single Sided Step Ladders
| Model Number | Height | Load Capacity | Width | Spread | Laddertop Dimensions | Rail Dimensions | Weight |
|---|---|---|---|---|---|---|---|
| OBEL04 | 4' | 375 lbs | 19-7/8" | 29" | 5-3/4" x 13" | Front: 3-1/8"; Rear: 1-7/8" | 16.000000 |
| OBEL06 | 6' | 375 lbs | 23-3/8" | 41-1/4" | 5-3/4" x 13" | Front: 3-1/8"; Rear: 1-7/8" | 24.000000 |
| OBEL08 | 8' | 375 lbs | 26-7/8" | 53-5/8" | 5-3/4" x 13" | Front: 3-1/8"; Rear: 1-7/8" | 32.000000 |
| OBEL10 | 10' | 375 lbs | 30-3/8" | 65-7/8" | 5-3/4" x 13" | Front: 3-1/8"; Rear: 1-7/8" | 41.000000 |
| OBEL12 | 12' | 375 lbs | 33-7/8" | 78-1/4" | 5-3/4" x 13" | Front: 3-1/8"; Rear: 1-7/8" | 51.500000 |
The Old Blue Series Electrician's ladder is not your ordinary Step Ladder -- it's a Jobstation. These Jobstations save time and increase productivity on the job. With a duty rating of 375 pounds, the Old Blue series features a customized HolsterTop with ToolLasso sockets to accommodate even more tools. Wire spool holders for both large and small spools and conduit holders with a built-in cutting system make these ladders ideal for electricians. The EDGE bracing system helps to decrease damage to the rail. Fiberglass rails are non-conductive.
Features- Customized HolsterTop with Lock-In System secures tools from falling. 3 ToolLasso included.
- Full set of rear horizontals spaced one per foot
- Slip-resistant Traction-Tred steps are double riveted and knee-braced
- Heavy duty internal spreaders
- EDGE bracing system helps to decrease damage to rail
- Shoe pads riveted to the EDGE structure
- Convenient conduit cutting system
- HolsterTop customized for electricians
- Built-in wire spool holders for both large and small spools
- *Energy Diffusing Geometry
- Every rivet backed up by metal plate or washer to protect rails
| Weight(LBS) | 0.000000 |
|---|---|
| Request Quote | No |
Write Your Own Review